Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Bring the rear lid out of the service position.
-
With a second technician, slide rear shelf - 1 - in between the rear lid - 2 - and frame - 3 -.
-
Install screws - 4 -.
-
Adjust the measurement between the stop buffers on the frame - 3 -.
-
Adjust an even gap dimension of 4 mm - arrows - and tighten screws at the markings.
‹› The assembly frame and locking bracket are clamped with the ( VAS 6373) and (VAS 6389).