Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Removing
-
Open roof until rear window frame - 4 - is placed on roof center section.
-
Remove seal - 1 - from rear window frame from center out.
-
On vehicles built through July 2007, pull the seal off the side securing strips - 3 -.
-
If vehicle built from August 2007, remove the screws - 2 -.
Installation
-
For easier installation, coat the seal - 1 - on the bottom with soapy water.
-
Press seal into mount on bottom of rear window frame - 4 -.
-
Tighten the screws - 2 - to 4.5 Nm.
With rear window frame closed and locked, seal must be seated on entire width of protective molding - 5 -.
Rear Shelf Stop Buffer
Rear Shelf Stop Buffer