Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
‹› Sun shade is slide all the way forward.
-
Slide rail - 1 - in.
-
Install screws - 2 and 3 -, but do not tighten yet. Bolt tightening specification 4.5 Nm
-
Pull rail in center down about 2 cm. This creates pretension on the rail so the sliding headliner can slide without dragging on the tensioned
headliner.
-
Tighten screws - 2 and 3 -. Bolt tightening specification 4.5 Nm
-
Insert noted number of spacer plates and tighten screw - 4 - to 8 Nm.