Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-326002.png)
-
Install the (T10394) and push the sliding sleeve in the - direction of the arrow -.
-
Install (T10055) to (T10394) and remove the balance shaft.
Installing
‹› Because of the small clearance between the balance shaft and cylinder block, the balance shaft may need to be cooled in order to install it. Check if
the balance shaft can be installed into the cylinder block without forcing it in. If it cannot, the balance shaft must be cooled before installing it.
