Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Crankshaft Main Bearing: Service and Repair
Crankshaft Bearing Shell, Allocating
The bearing shells are allocated to the cylinder block with the correct thickness at the factory. Colored dots serve to identify the bearing thicknesses.
The code letters on the lower contact surface or on the top of the cylinder block identify which bearing shell and where it must be installed in the
cylinder block (upper bearing shell).
The code letters on the crankshaft identify which bearing shells and where they must be installed in the bearing cap (lower bearing shell).
The first letter is for bearing cap one, the second for bearing cap two, etc.
Cylinder Block:
The cylinder block identification may be located either on the oil pan sealing surface or on the top (transmission side) of the cylinder block.
The identification on the cylinder block is for the upper bearing shell.