Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-349005.png)
‹› Deviation from nominal dimension: Max. 0.08 mm
‹› Measurement of the cylinder bore may not be performed when the cylinder block is mounted on the engine and transmission holder (VAS 6095),
false measurements are possible.
Installed Position of the Bearing Shell
-
Place the bearing shell centrally into the connecting rod and connecting rod bearing cap.
Dimension - a - must be the same on the left and right sides.
