Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
19
Upper Oil Pan
‹› Removing and installing, refer to => [ Upper Oil Pan ] See: Upper Oil Pan.
20
Bolt
‹› 9 Nm
21
Bolt
‹› Tightening sequence, refer to => [ Upper Oil Pan Bolt Tightening Sequence
and Specification ].
‹› Always replace
22
Oil Intake Pipe
‹› Clean the strainer if contaminated.
23
O-ring
‹› Always replace
24
O-ring
‹› Always replace
25
O-ring
‹› Always replace
26
Non-Return Valve
27
Oil Drain Plug
‹› 30 Nm
28
Nut
‹› 9 Nm
Lower Oil Pan Bolt Tightening Sequence and Specification
-
Tighten the bolts - 1 through 20 - in 3 stages as follows:
1 - Tighten the bolts hand-tight