Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Glove Box Lamp: Service and Repair
Lamps
Glove Compartment Lamp
Special tools, testers and auxiliary items required
‹› Trim removal wedge (VAS 3409)
‹› When removing and installing components in a visible area (switches, covers, trim, etc.), mask off the areas at which a prying tool ( ( VAS 3409),
screwdriver) will be positioned, using commercially available adhesive tape.
Removing:
-
Turn off the ignition and all electrical consumers.
-
Carefully pry out the diffusion lens using the (VAS 3409 ) or a screwdriver.
-
Disconnect electrical connection - arrow -.
Bulb, replacing:
-
Disengage retaining tabs - 1 - and remove heat shield - 2 - from the diffusion lens of the light.