Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-522002.png)
-
Connect the (VAS 6394/1) pressure line to the (VAS 6394/2).
-
Connect the fuel pressure sensor and its connector with the test instrument adapter/DSO (3-pin) (VAS 5570).
-
Switch the (VAS 6394/1) on by pressing the button - A - briefly.
‹› Holding the button - A - for 2 seconds switches on the illumination for 20 seconds.
‹› If the (VAS 6394/1) does not display 0 bar, set it back to zero, refer to the operating instructions.
-
Connect the vehicle diagnostic tester to the diagnostic connector.
