Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Knock Sensor: Service and Repair
Knock Sensor 1 (G61)
Removing
-
Remove the electrical connector - 2 - from the knock sensor 1.
-
Remove the coolant pump. Refer to => [ Coolant Pump ] See: Engine, Cooling and Exhaust/Cooling System/Water Pump/Service and
Repair/Coolant Pump.
‹› The knock sensor 1 is located below the intake manifold behind the coolant pump.
-
Remove the knock sensor 1.
Installing
-
Installation is performed in reverse order.
‹› Tightening specifications, refer to => [ Ignition System Component Overview ] See: Ignition System/Service and Repair/Ignition System
Component Overview.