Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Air Filter Element: Service and Repair
Air Filter Element
Removing
Engine Code CBFA:
-
Disconnect the hose leading to the Secondary Air Injection (AIR) pump motor (V101) from the air filter housing.
Continuation for All:
-
Remove the bolts - arrows - from the upper air filter housing.
-
Lift the upper air filter housing and remove the air filter element.
Installing
Tightening specifications, refer to => [ Air Filter Housing Overview ] See: Service and Repair/Air Filter Housing Overview.
‹› Always use an original equipment air filter element.
‹› Hose connections and charge air system hoses must be free of oil and grease before installing. When installing, do not use any lubricants
containing silicone.
‹› The air filter housing must be clean.
‹› Secure all hose connections using hose clamps of series-production status.
‹› Note the following when cleaning the air filter housing with pressurized air: To prevent malfunctions, cover the critical air flow components, such
as the MAF sensor, air intake pipes, etc., with a clean cloth.
‹› Observe disposal regulations!
-
Check the MAF sensor and intake hose (intake air side) for salt residue, dirt, and leaves.
-
Check the air intake hose from the air duct for dirt.
-
Remove the snow screen - 1 - and clean it.