Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-580002.png)
-
Disconnect the electrical harness connector - arrow - from the Fuel Pump Control Module.
-
Connect the multimeter ground lead to terminal - 6 - of the Fuel Pump Control Module harness connector.
-
Connect the multimeter positive lead to terminal - 1 - of the Fuel Pump Control Module harness connector.
-
Turn the Ignition key to the ON position.
-
The meter should read within 1 volt of battery voltage.
-
Turn the Ignition OFF.
