Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-457004.png)
-
Pry up the locking mechanism - 2 - slightly.
-
Then slide the ECM out of the retainer - arrow -.
-
Disconnect the rear connector from the ECM.
Installing
-
Connect and lock the rear connector to the ECM.
-
Slide the ECM onto the retaining plate.
-
Connect and lock the front connector to the ECM.
-
Slide the protective housing onto the retaining plate.
-
Tighten the shear bolts - 1 - uniformly until the bolt heads shear off.
-
Install the bulkhead plenum chamber, the plenum chamber cover and the wiper arms.
