Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
1. (VW 418 A)
2. Mounting bracket with bonded rubber bushing
3. Wishbone
4. (VW 401)
Suspension Strut
Suspension Strut
‹› Adaptive chassis DCC suspension strut, removing and installing, refer to => [ Suspension Strut ] See: Self-Leveling Suspension.
Special tools, testers and auxiliary items required
‹› Torque wrench (V.A.G 1332)
‹› Spreader (3424)
‹› Engine/transmission jack (V.A.G 1383 A)
‹› Wheel Hub Support (T10149)
Removing
-
Loosen drive axle bolt to wheel hub:
‹› Hex head bolt, refer to => [ Drive Axle Hex Bolt Connection, Loosening and Tightening ] See: Wheel Hub/Axle Nut/Service and Repair/Removal
and Replacement.
‹› Twelve point bolt, refer to => [ Drive Axle Twelve-Point Bolt, Loosening and Tightening ] See: Wheel Hub/Axle Nut/Service and
Repair/Procedures.
‹› Vehicle must not be standing on its wheels when doing this, otherwise wheel bearing will be damaged.
-
Remove wheel.