Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
-
Using a ratchet and the (3424), open the wheel bearing housing slot.
-
Press brake disc in direction of suspension strut by hand.
Otherwise strut tube may be canted in hole of wheel bearing housing.
-
Pull off wheel bearing housing downward from strut tube and lower using (V.A.G 1383 A) as far until strut tube hangs freely.
-
Tightly tie wheel bearing housing to console/subframe using binding wire.
-
Remove (V.A.G 1383 A) from below wheel bearing housing.
-
Remove wiper arms.
-
Remove plenum chamber cover.
-
Remove the hex bolts for the upper strut mount and remove suspension strut.
Installing
-
Secure (V.A.G 1383 A) with (T10149) to wheel hub using a wheel bolt.