Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
‹› Ignore - arrows A and B -.
Continuation for All
-
Position the pressure plate on the alignment pins.
-
Install all bolts uniformly by hand until the bolt heads make contact with the thrust plate.
-
Tighten the bolts - item 4 -=> [ Bolt ] See: Service and Repair/02Q Transmission/Clutch Overview, Sachs in small steps and in a diagonal
sequence to prevent damaging the centering holes of the pressure plate and the centering pins of the dual mass flywheel.
‹› Install the transmission.