Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
/l4-2.0l_turbo_(ccta)/Page-700005.png)
A Support, for example, (22/2)
B Internal puller 46 to 58 mm, for example, (21/7)
‹› Replace the washer after pulling out.
Pressing Outer Race/Tapered Roller Bearing with Shim into Clutch Housing
‹› Pay attention to the shim installed position.
‹› The collar on the inner circumference faces the seal.
Removing the Bearing Inner Race/Taper Roller Bearing
