Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Shift Cable: Description and Operation
Plastic Relay Lever
Plastic Relay Lever from 03.07
‹› To remove the relay lever, the selector cable retainer must be disconnected.
This prevents damage to the selector cable.
-
Pull the securing mechanism forward as far as the stop in the direction of - arrow 1 - and then unlock it to the left in the direction of - arrow 2 -.
-
Then press the relay lever forward (- direction of arrow 3 -).
Relay Lever with Tab - arrow 1 - (see illustration N34-10903)
-
Press the tab - arrow 1 - down as far as the stop and remove the relay lever together with the cable retainer. Move it in the operating direction
when doing so.