Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Installation is performed in the reverse order of removal.
-
Check the cable before installing it on the transmission. Refer to => [ Selector Lever Cable Checking, through 02.2009 ] See: Automatic
Transmission/Transaxle/Shift Linkage/Shift Cable/Testing and Inspection.
-
Install the exhaust system components.
-
Install the heat shield.
-
Adjust the selector lever cable after installing. Refer to => [ Selector Lever Cable Adjusting, through 02.2009 ] See: Automatic
Transmission/Transaxle/Shift Linkage/Shift Cable/Adjustments.