Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Liftgate Window Glass: Service and Repair
Rear Lid
Striker Pin with Closing Aid Motor
Removing
-
Remove rear lock carrier cover.
-
Remove electrical connector - 4 - from closing aid.
-
Disengage emergency release - 2 - from striker pin - 1 -.
-
Remove the bolts - 3 -.
-
Remove striker pin - 1 - from rear lock carrier.
Installation
-
Install striker pin - 1 - on rear lock carrier and position screws - 3 -.
Screw tightening specification - 3 -: 23 Nm
Further installation is in reverse order of removal.
Adjusting, refer to => [ Rear Lid Catch with Closing Aid Motor, Adjusting ] See: Body and Frame/Doors, Hood and Trunk/Trunk /
Liftgate/Description and Operation