Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
‹› The door window is adjusted.
-
Remove side trim.
-
Loosen threaded pin nut - 3 - to adjust angle.
-
Adjust threaded pins with (V.A.G 1739).
-
Tighten lock nut - 3 -. Tightening specification: 10 Nm.
The window regulator must not be tensioned.
-
Loosen nuts - 2 - and adjust threaded pins with (V.A.G 1739) until threaded pins lightly contact window regulator.
-
Tighten nuts - 2 -. Tightening specification: 10 Nm.
-
Perform a function check and check adjustment with roof open and closed.
-
Check adjustment dimension of side window with roof closed. Refer to => [ Side Window Adjustment Dimensions ] See: Front Door Window
Glass/Adjustments/Side Window Adjustment Dimensions.