Eos (1F7) L4-2.0L Turbo (CCTA) (2009)
Windshield Washer Spray Nozzle: Service and Repair
Windshield Spray Nozzles
Removing:
-
Press nozzle upward - arrow A - and pull out flap at rear - arrow B -.
-
Disconnect hose - 1 - from spray nozzle and disconnect harness connector - 2 -.
Installing:
-
Connect harness connector - 2 - and hose - 1 - to spray nozzle.
-
Slide spray nozzle into installation opening until it engages audibly.
-
Adjust spray jets. Refer to => [ Windshield Washer System Spray Nozzles, Adjusting ] See: Adjustments.