Eos (1F7) V6-3.2L (BUB) (2008)
Navigation Display: Service and Repair
Radio And Radio-Navigation Systems
NOTE: Use the chapter for the individual unit when removing and installing.
"Premium Sound System" radio system.
"Radio-Navigation system" and "Radio-Navigation system with Dynaudio Sound".
Special tools, testers and auxiliary items required
-
Trim Removal Wedge 3409
Removing
Before starting repair work, perform the following:
-
If necessary, remove CDs remaining in unit see Owners Manual
-
Switch off ignition, switch off all electrical components and remove ignition key.
Now, perform the following work procedure:
-
Using trim removal wedge 3409, carefully pry out cover of center console in area of - arrows - and remove cover.
-
Remove screws - arrows - on radio navigation system.
-
Pull radio navigation system out of installation compartment far enough until harness connectors on rear side of radio navigation system are
accessible.
-
Press connector lock together in direction of - arrows -.