Eos (1F7) V6-3.2L (BUB) (2008)
Trailer Hitch: Service and Repair
Rear Bumper Cover
Trailer Hitch Assembly Overview
‹› The tightening specifications only apply to factory-installed trailer hitches.
‹› Obtain tightening specifications of other tow hitches from corresponding manufacturer.
1
Trailer Hitch
‹› Removing rear bumper carrier. Refer to => [ Rear Bumper Cover ] See: Body and Frame/Bumper/Rear Bumper/Rear Bumper Cover /
Fascia/Service and Repair.
‹› Trailer hitch with removable ball head - 4 - is depicted.
2
Bolt
‹› Sealing threaded connections
‹› 2 pieces per side
‹› Tightening specification: 20 Nm
DANGER!
Bolts - 2 - are sealing threaded connections and seal the interior from exhaust gases and must be installed in any case.
3
Protective Cap