Eos (1F7) V6-3.2L (BUB) (2008)
-
Clean the bolt threads and coat them with locking compound D 000 600 A2.
-
Tighten rear upper and lower screws - 2 - and front screw. Tightening specification: 8 Nm.
-
Install front upper screw - 2 -, but do not tighten yet.
-
Install door window.
-
Raise door window, front upper screw positions itself.
-
Tighten upper front screw - 2 -. Tightening specification: 8 Nm.
-
Press the cover caps - 3 - into the lower edge of the door.
Door window inclination can be adjusted - arrow b - via elongated hole on lower screws - 2 -
-
Perform window regulator basic setting
-
Adjust door window.