Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1993005.png)
-VAS 3356-. Carefully remove excess adhesive with adhesive removal
solution, Part No. D 002 000 10 or equivalent.
Tip:
DO NOT inspect freshly bonded seal surfaces, door MUST remain OPEN for 2 hours to allow adhesive to cure.
^
Enable interior lighting.
Installation of outer door seal (new part)
^
Install outer door seal, see Repair Manual Group 57, Front Door, Central Locking System, Outer Door Seal Removal and Installation, or Group 58,
Rear Door, Outer Seal Removal and Installation in ElsaWeb.
Note:
DO NOT over stretch seal during installation process.
