Eos (1F7) V6-3.2L (BUB) (2008)
-
Clip release - 2 - into lid lock - 1 -.
-
Install lid lock - 1 - in lock carrier - 3 -.
-
Screw tightening specification - 4 -: 12 Nm
-
Connect harness connector - 5 - for Front Hood Switch.
-
Install release - 2 -. Refer to => [ Release Coupling ]. See: Service and Repair/Hood/Release Coupling
-
Adjust lid lock. Refer to => [ Hood Latch, Adjusting ] See: Service and Repair/Hood Overview
‹› Before closing the hood, check the operating lever and release function.