Eos (1F7) V6-3.2L (BUB) (2008)
Hood Latch Release: Service and Repair
Hood Operating Lever
Removing
-
Engage the operating lever - 1 - and release hood.
-
Insert a small screwdriver into gap between operating lever - 1 - and clip - 2 -.
-
Remove clip - 2 - from operating lever - 1 - and pull operating lever off.
Installing
-
Slide clip - 2 - completely into operating lever - 1 -.
-
Then push operating lever - 1 - onto mount in mounting bracket and lock the operating lever.
-
Before the hood is closed, a function test of the operating lever and release cable must be performed.