Eos (1F7) V6-3.2L (BUB) (2008)
Hood Latch Release Cable: Service and Repair
Hood Release Cable Coupling, Disconnecting
Disconnecting
-
Loosen release cable coupling - 1 - over headlamp on driver's side of lock carrier - 2 - from clips - 3 -.
-
Open release cable coupling - 1 - upward in - direction of arrow b - and remove cable - 4 - in - direction of arrow a - from coupling - 1 -.
Connecting
-
Take release cable - 4 - and engage it in - direction of arrow a - in cable coupling - 1 -.
-
Connect release cable coupling - 1 - in - direction of arrow b - and lock coupling in clips - 3 - on lock carrier - 2 -.
NOTE: When installing, make sure that release cable sleeve is inserted correctly and coupling is locked.
-
Before the hood is closed, a function test of the operating lever and release cable must be performed.