Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-2032001.png)
Body Emblem: Service and Repair
Name Plates and Emblems Installation Information
Name Plates and Emblems Installation Information
‹› Warm the name plates with a (V.A.G 1416) before removing.
‹› Only use adhesive remover (D 002 000 10).
‹› Make sure the adhesive surfaces are free of dust and grease.
‹› Apply the name plates immediately after cleaning them.
‹› Only remove the protective film right before assembly. The processing temperature is approximately 21 °C.
