Eos (1F7) V6-3.2L (BUB) (2008)
Cowl Moulding / Trim: Service and Repair
Intake Air Grille
Intake Air Grille
Removing
-
Remove plenum chamber cover.
-
Remove cover - 1 - from plenum chamber.
‹› From June 2008 with Climatronic, a bracket with an Air Quality Sensor (G238) is installed on the intake air grille.
‹› For Air Quality Sensor (G238) function, refer to=> [ Air Quality Sensor Function ] See: Heating and Air Conditioning/Description and
Operation/Climatronic A/C System With Automatic Control.
-
Release the Air Quality Sensor (G238) - 1 - and rotate it to the right to remove it from the bracket.
-
Remove the flange nuts - arrows - (2.5 ± 0.4 Nm) and remove the intake air grille upward.