Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-2063013.png)
Installing
-
Perform the steps used for removal in reverse order.
Center Console Cupholder, Highline
Center Console Cupholder, Highline
Removing
-
Open cup holder - 1 - and remove two bolts - 2 - (1.5 Nm).
-
Pull cup holder out of center console.
‹› When installing, cup holder must be inserted (first at bottom) into center console while in a closed state. Then it must be opened and then install
the two bolts - 2 -.
