Eos (1F7) V6-3.2L (BUB) (2008)
Removing
-
Position rear lid in service position.
-
Remove seat bench, refer to => [ Bench Seat ] See: Seats/Service and Repair/Removal and Replacement/Rear Seats.
-
Remove screw - 1 - (2 Nm) in belt extraction panel area.
-
Remove bolts - 1 - and - 2 - (1.5 Nm).
-
Remove side trim upward out of mounts in body.
-
Disconnect wiring harness from speaker.