Eos (1F7) V6-3.2L (BUB) (2008)
-
Remove bolts - 4 - from left and right longitudinal members.
-
Install (T 10093) on left and right longitudinal members.
-
Remove bolts - 2 - at left and right on top of lock carrier - 1 -.
-
Lock carrier - 1 - can be pulled toward front approximately. 10 cm on (T 10093).
Service Position, Resetting
To install, perform the steps used for removal in reverse order.
-
Align the lock carrier with the longitudinal members and between the fenders.
‹› Make sure that pressure hoses for charge air cooler are re-engaged correctly.
‹› Hoses and lines must not be pinched.
Pressure Hoses, Releasing
-
Disengage connector coupling - 1 - and disconnect pressure hose - 2 - in - direction of arrow - from coupling.
-
When re-connecting pressure hoses, make sure that connector couplings engage audibly.
Lock Carrier Service Position Assembly Overview
Lock Carrier Service Position Assembly Overview