Eos (1F7) V6-3.2L (BUB) (2008)
Service
Correct position of lengthways adjustment lever
-
Remove the seat(s), see Repair Manual Group 72 in ElsaWeb.
-
Invert the seat and place on a clean, level, firm surface.
-
Remove the plastic slide of the lever (Figure 3, No. 1).
-
Press the lever/shaft (Figure 4, in blue) all the way to the left (in direction of the arrows).
-
Using a suitable prying tool, carefully bring the adjustment lever (see figure 5, No. 3) (see figure 5, No. 2) in correct position (illustration 1 green
ellipse)
-
Install the slide (figure 3, No. 1) on the lever.
Check the Seat Rail Lock