Eos (1F7) V6-3.2L (BUB) (2008)
1
Transport protection for valve domes (foam)
2
Sealing plug M 10
3
Sealing plug M 12
After separating the control module from the hydraulic unit, always install transport protection - 1 - on the hydraulic unit for the valve domes.
Warranties will not be granted for hydraulic units without transport protection.
Component Location
The control module is bolted to the hydraulic unit and is located on the right side in the engine compartment.
Removing
CAUTION!
Do not bend the brake lines near the hydraulic unit.
-
Read and note the present control module coding.
-
Note or request the radio code on vehicles with a coded radio, if necessary.
-
Disconnect the battery.
-
Remove the engine cover.
-
Release the control module connector in - direction of arrow 1 - and pull off in - direction of arrow 2 -.