Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1150002.png)
Installing
-
Installation is performed in the reverse order of removal.
When installing ESP sensor unit, be sure it is properly seated on the bracket and is free of tension.
‹› Do not use the nuts to forcibly position the ESP sensor unit.
-
Tighten the nuts to 9 Nm.
-
Perform a transverse acceleration sensor basic setting.
(VAS 5051), connecting and selecting functions. Refer to => [ VAS 5051, Connecting and Selecting Functions ] See: Testing and Inspection/Scan
Tool Testing and Procedures.
