Eos (1F7) V6-3.2L (BUB) (2008)
10 - Guide pins, 30 Nm
11 - Cap
^
Remove
12 - Washer
13 - Vibration damper
14 - Bolt, 10 Nm
15 - Dust cap
16 - Bracket
17 - Bolt, 15 Nm
18 - Brake line, 14 Nm
19 - Brake hose
20 - Hex socket bolt, 8 Nm
21 - Bracket
22 - Spring clamp
FN3 Front Brake Caliper Assembly Overview
Brake Caliper Assembly Overview (Front Brakes FN3)
Note:
^
After replacing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
^
Use brake charger/bleeder unit VAS 5234 or extraction device V.A.G. 1869/4 to extract brake fluid from brake fluid reservoir.
^
Before removing brake caliper or disconnecting brake hose, brake pedal depressor V.A.G. 1869/2 must be inserted (this dissipates pressure).
FN3 Caliper, 15 Inch