Eos (1F7) V6-3.2L (BUB) (2008)
1 - Phillips/Torx screw, 4 Nm
2 - Brake disc
^
Internally vented, dia, 11.34 in
^
Thickness 0.98 in
^
Wear limit: 0.87 in
^
Must always be replaced together on both sides of axle
^
Remove brake caliper and brake carrier before removing
3 - Brake pads
^
Thickness 14 mm without backing plate
^
With wear indicator
^
When wear limit is reached (limit: approximately 4 mm), the warning lamp lights up in instrument cluster
^
Wear limit: 2 mm without backing plate
^
Must always be replaced together on both sides of axle
4 - Retaining spring
^
Insert in both holes of brake caliper
5 - Brake carrier
^
Bolt to wheel bearing housing
6 - Brake caliper
^
Do not unscrew brake hose when replacing brake pad
7 - Guide pins, 30 Nm
8 - Cap
^
Remove
9 - Brake hose with banjo fitting and union bolt, 35 Nm
10 - Ribbed bolt, 190 Nm