Eos (1F7) V6-3.2L (BUB) (2008)
1 - Dust cap
^
Install onto bleeder valve
2 - Bleeder valve, 10 Nm
^
Apply a thin coat of assembly paste G 052 150 A2 to the threads before screwing in.
3 - Caps
^
Insert in bushing
4 - Guide pins, 30 Nm
5 - Bushing
^
Insert in brake caliper
6 - Brake caliper
7 - Brake carrier
^
Bolt to brake caliper
8 - Retaining spring
^
Insert with both ends in holes of brake caliper
9 - Seal
10 - Piston
^
Apply thin coat of assembly paste G 052 150 A2 to piston before inserting
11 - Protective cap
^
Do not damage when installing piston