Eos (1F7) V6-3.2L (BUB) (2008)
‹› Removing and installing, refer to => [ Brake Caliper Piston ] See: Overhaul.
10 - Pistons
‹› Removing and installing, refer to => [ Brake Caliper Piston ] See: Overhaul.
‹› Apply thin coat of assembly paste (G 052 150 A2 ) to the piston before installing.
11 - Protective cap
‹› Removing and installing, refer to => [ Brake Caliper Piston ] See: Overhaul.
‹› Do not damage when installing piston.
FNR-G
Brake Caliper Assembly Overview
‹› Install complete repair kit when servicing.
‹› Only use mineral spirits to clean brake parts.
‹› Apply a thin coat of assembly paste (G 052 150 A2 ) to the brake cylinders, pistons and seals.
1 - Dust cap
‹› Install onto bleeder valve.
2 - Bleeder valve, 12 Nm