Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1172007.png)
-
Install both protective caps.
-
Install the brake caliper retaining spring to the brake pad retaining spring and press under brake carrier.
-
Connect the brake pad wear indicator connector.
-
Install the wheels.
‹› After replacing the brake pads, press the brake pedal firmly several times with the vehicle stationary so that the brake pads are properly seated in
their normal operating position.
‹› Check the brake fluid level after replacing the brake pads.
