Eos (1F7) V6-3.2L (BUB) (2008)
Brake Caliper: Description and Operation
Brakes - Mechanical Components
CII 38 Rear Brake Caliper Assembly Overview
Brake Caliper Assembly Overview (Rear Brakes CII 38)
Note:
^
After replacing brake pads, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their
normal operating position.
^
Use brake charger/bleeder unit VAS 5234 or extraction device V.A.G. 1869/4 to extract brake fluid from brake fluid reservoir.
^
Before removing brake caliper or disconnecting brake hose, brake pedal depressor V.A.G. 1869/2 must be inserted (this dissipates pressure).
1 - ABS wheel speed sensor
^
Before inserting sensor, clean inner surface of bore hole and coat with hot bolt paste G 052 112 A3
2 - Hex socket head bolt, 8 Nm
3 - Multi point socket head bolt, 90 Nm + 90 degree
^
Always replace after removal
4 - Wheel bearing housing
5 - Cover plate
6 - Torx bolt, 12 Nm
7 - Wheel bearing/hub unit
8 - Brake disc
^
Dia. 11.26 in