Eos (1F7) V6-3.2L (BUB) (2008)
1 - Cover plate
2 - Torx bolt, 12 Nm
3 - Brake disc
^
Internally vented, dia. 13.58 in
^
Thickness 1.18 in
^
Wear limit: 1.06 in
^
Must always be replaced together on both sides of axle
^
Remove brake caliper and brake carrier before removing
4 - Torx bolt, 4 Nm
5 - Brake carrier
^
Bolt to wheel bearing housing
6 - Retaining spring
^
Insert in brake pad retaining spring and press below brake carrier.
7 - Ribbed bolt, 190 Nm
^
Clean if reusing
8 - Brake pads
^
Thickness 14 mm without backing plate
^
With wear indicator
^
When wear limit is reached (limit: approximately 4 mm), the warning lamp lights up in instrument cluster
^
Wear limit: 2 mm without backing plate
^
Must always be replaced together on both sides of axle
9 - Brake caliper
^
Do not bolt to brake hose/brake line when changing brake pads
^
Must not be removed