Eos (1F7) V6-3.2L (BUB) (2008)
/v6-3.2l_(bub)/Page-1184003.png)
^
When loosening and tightening, counter-hold at guide pin
5 - Guide pin with stepping
^
Shorter than item 6
^
Grease before pulling on protective cap
6 - Guide pins
^
Longer than item 5
^
Grease before pulling on protective cap
7 - Protective cap
^
Pull onto brake carrier and guide pin
8 - Brake pad with damper
^
Supplied as pre-assembled replacement part with sufficient grease on guide pins
^
If protective caps or guide pins are damaged, install repair kit. Use supplied grease packet to lubricate guide pins.
9 - Protective cap
^
Pull onto piston with outer sealing lip
10 - Piston with automatic adjustment
^
Apply thin coat of assembly paste G 052 150 A2 to piston before inserting
11 - Seal
FNR-G Front Brake Caliper Assembly Overview
Brake Caliper Assembly Overview (Front Brakes FNR-G)
^
Install complete repair kit when servicing.
^
Only use mineral spirits to clean brake parts.
^
Apply thin coat of assembly paste G 052 150 A2 to brake cylinders, pistons and seals.
1 - Dust cap
