Eos (1F7) V6-3.2L (BUB) (2008)
1 - Dust cap
‹› Install onto bleeder valve.
2 - Bleeder valve, 10 Nm
‹› Apply a thin coat of assembly paste (G 052 150 A2) to the threads before installing.
3 - Caps
‹› Insert in bushing.
4 - Guide pins, 30 Nm
5 - Bushing
‹› Insert in brake caliper.
6 - Brake caliper
7 - Brake carrier
‹› Bolt to brake caliper.
8 - Retaining spring
‹› Insert with both ends in holes of brake caliper.
9 - Seal