Eos (1F7) V6-3.2L (BUB) (2008)
Brake Caliper: Overhaul
FN 3
Brake Caliper Piston
Special tools, testers and auxiliary items required
‹› Trim removal wedge (3409)
‹› Piston resetting tool (T 10145)
‹› Disk (T 10146/6)
Removing
-
Force the piston from the brake caliper using compressed air.
Place a wooden board into the recess of the caliper housing so it is not damaged.
-
Remove the protective cap from the brake caliper using trim removal wedge (3409).
-
Remove the seal using trim removal wedge (3409 ).