Eos (1F7) V6-3.2L (BUB) (2008)
-
Insert the inner seal in cylinder groove using the trim removal wedge (3409).
Hold piston in front of brake caliper for this procedure.
-
Install piston using the resetting & extracting tool (T 10165) by turning the knurled wheel toward the right.
-
Use (T 10165/1)for assistance when installing.
‹› Insert the resetting & extracting tool (T 10165 ) so the collar makes contact on the brake caliper.
‹› The automatic adjustment in brake caliper is destroyed when piston is moved with resetting & extracting tool (T 10165) or the brake pedal is