Eos (1F7) V6-3.2L (BUB) (2008)
Vacuum Pump: Service and Repair
Brake System Vacuum Pump
Component location: Located on the front of the automatic transmission in direction of travel.
It is not possible to service the brake system vacuum pump. If there is a malfunction, replace the brake system vacuum pump.
Can be checked in "Guided Fault Finding" using the (VAS 5051)
Removing
-
Disconnect the vacuum hose - 1 - from the brake system vacuum pump.
-
Disconnect the harness connector - 2 - for the brake system vacuum pump.
-
Remove the remaining harness connectors and wires from the bracket - 3 -.
-
Remove the bracket bolts - arrows - and bracket - 3 - with the brake system vacuum pump.
-
Then remove the brake system vacuum pump bolts - arrows - and pump - 1 - from the bracket - 2 -.
Installing
Installation is performed in the reverse order of removal.