Eos (1F7) V6-3.2L (BUB) (2008)
Thermostat: Service and Repair
Coolant Thermostat
Coolant Thermostat
Removing
‹› Drained coolant must be stored in a clean container for disposal or reuse.
-
Remove the thermostat housing. Refer to => [ Coolant Thermostat Housing ] See: Coolant Thermostat Housing.
-
Remove the bolts - arrows - and remove the connecting piece - 1 -.
-
Remove the O-ring - 3 - together with the coolant thermostat - 2 - from the coolant thermostat housing - 1 -.
Installing
Installation is performed in the reverse order of removal, noting the following:
‹› Always replace gaskets and seals.
-
Clean the O-ring sealing surfaces.
-
Install the coolant thermostat.
‹› Installed position: align the breather valve - arrow - as shown in the illustration.
-
Lubricate the new O-ring - 1 - with coolant.